. .

Thread: Masking tape

  1. #1
    I`m going to try the masking tape and glue hold down method, do I use any masking tape and super glue

  2. #2
    JAZZCNC's Avatar
    Lives in wakefield, United Kingdom. Last Activity: 19 Hours Ago Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 8,419. Received thanks 1,442 times, giving thanks to others 108 times. Referred 1 members to the community.
    Yes, ordinary masking tape works, we use it all the time without any issues, but the blue painter's tape works best.
    Any cheap superglue will work.
    -use common sense, if you lack it, there is no software to help that.

    Email: dean@jazzcnc.co.uk

    Web site: www.jazzcnc.co.uk

  3. #3
    +1 for blue tape. I get bottles of superglue from B&Q -

    https://www.diy.com/departments/dial...0110615_BQ.prd

    Works well, lasts well, so economical.

  4. #4
    Toolstation is where you need to be, less that half B&Q price and top class stuff, high or low viscosity.

    https://www.toolstation.com/hv-super-glue/p10893

    They also have the blue masking tape.
    Spelling mistakes are not intentional, I only seem to see them some time after I've posted

  5. #5
    I'll remember that when I'm next in a Toolstation, but what I'd save on tape & glue I'd more than spend on petrol...

  6. #6
    Toolstation has a low free delivery threshold 25. The stupid thing is that if you have 20 in the basket, it is either spend another fiver or pay the same anyway. I just fill up the 25 with masking tape, superglue or wall plugs.

  7. #7
    I used to get the blue 3m stuff but it gets expensive, now I buy yellow stuff from a car paint supplier.

    Its called Q1 and works out about 1.50 a roll if you buy a whole box, really good for that price.

    Ollie

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. V Cutting Tape
    By Leadhead in forum Tool & Tooling Technology
    Replies: 19
    Last Post: 31-12-2017, 01:16 AM
  2. masking tape for engraving
    By universally in forum General Discussion
    Replies: 4
    Last Post: 02-03-2016, 05:00 AM
  3. V fold Tape
    By orangeart in forum General Discussion
    Replies: 2
    Last Post: 11-02-2016, 06:16 AM
  4. Double sided tape
    By racerbear02 in forum Woodwork Discussion
    Replies: 4
    Last Post: 22-12-2014, 02:36 PM
  5. Accurate Tape Measure?
    By Tenson in forum Tool & Tooling Technology
    Replies: 19
    Last Post: 26-05-2012, 03:41 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •