. .
  1. #1
    Hello guys,
    my name is Giampiero and I would like to introduce my self.
    I am going to purchase my first CNC router for my garage (I was thinking about stepcraft...but if you have any other suggestion please feel free to let me know).
    I have had this in mind for many years and finally I found a garage to share with some other technician
    Professionally I work for an Italian CNC router manufacturer calld Protek as a project/sales manager.
    I live Italy, but I frequently travel to UK.
    Thank you for letting me in :)

  2. #2
    Welcome to the forum Giampiero!

  3. #3
    mekanik's Avatar
    Lives in Barrow in Furness, United Kingdom. Last Activity: 14 Hours Ago Has been a member for 9-10 years. Has a total post count of 786. Received thanks 96 times, giving thanks to others 176 times.
    Hi Giampiero welcome to the forum.
    If you can give some information regarding your requirements, ie table size and intended use no doubt someone will better advise, a certain member on the forum does produce CNC machines that are highly recommended.
    Enjoy the forum
    Regards
    Mike

  4. #4
    I was thinking about:
    a worktable size 1000mm x 500mm
    worktable size mdf
    1kW electrospindle
    vacuub blocking system

  5. #5
    mekanik's Avatar
    Lives in Barrow in Furness, United Kingdom. Last Activity: 14 Hours Ago Has been a member for 9-10 years. Has a total post count of 786. Received thanks 96 times, giving thanks to others 176 times.
    Hi CNCConnect
    sorry i should have been a bit clearer in my last post, to calculate motor loading the weight of the gantry needs to be known, also the drive arrangement ie acme/trapazoidal or ball screws, if you provide this information i am sure Dean will comment regarding suitable motors and power supplies.
    Kindest Regards
    Mike

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. NEW MEMBER: Hi from Italy
    By emapro2001 in forum New Member Introductions
    Replies: 1
    Last Post: 13-12-2010, 04:42 PM
  2. NEW MEMBER: Hello from Italy
    By simo.borgo in forum New Member Introductions
    Replies: 1
    Last Post: 10-11-2010, 12:04 AM
  3. NEW MEMBER: Hi to all, Italy
    By ziogessy in forum New Member Introductions
    Replies: 1
    Last Post: 12-09-2010, 11:22 PM
  4. NEW MEMBER: Hi from Italy
    By massimomb in forum New Member Introductions
    Replies: 2
    Last Post: 19-07-2009, 12:18 PM
  5. NEW MEMBER: Hello from Italy
    By franc33 in forum New Member Introductions
    Replies: 1
    Last Post: 29-03-2009, 06:49 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •