. .
  1. #1
    Hello guys,
    my name is Giampiero and I would like to introduce my self.
    I am going to purchase my first CNC router for my garage (I was thinking about stepcraft...but if you have any other suggestion please feel free to let me know).
    I have had this in mind for many years and finally I found a garage to share with some other technician
    Professionally I work for an Italian CNC router manufacturer calld Protek as a project/sales manager.
    I live Italy, but I frequently travel to UK.
    Thank you for letting me in :)

  2. #2
    Welcome to the forum Giampiero!

  3. #3
    Hi Giampiero welcome to the forum.
    If you can give some information regarding your requirements, ie table size and intended use no doubt someone will better advise, a certain member on the forum does produce CNC machines that are highly recommended.
    Enjoy the forum
    Regards
    Mike

  4. #4
    I was thinking about:
    a worktable size 1000mm x 500mm
    worktable size mdf
    1kW electrospindle
    vacuub blocking system

  5. #5
    Hi CNCConnect
    sorry i should have been a bit clearer in my last post, to calculate motor loading the weight of the gantry needs to be known, also the drive arrangement ie acme/trapazoidal or ball screws, if you provide this information i am sure Dean will comment regarding suitable motors and power supplies.
    Kindest Regards
    Mike

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. NEW MEMBER: Hi from Italy
    By emapro2001 in forum New Member Introductions
    Replies: 1
    Last Post: 13-12-2010, 04:42 PM
  2. NEW MEMBER: Hello from Italy
    By simo.borgo in forum New Member Introductions
    Replies: 1
    Last Post: 10-11-2010, 12:04 AM
  3. NEW MEMBER: Hi to all, Italy
    By ziogessy in forum New Member Introductions
    Replies: 1
    Last Post: 12-09-2010, 11:22 PM
  4. NEW MEMBER: Hi from Italy
    By massimomb in forum New Member Introductions
    Replies: 2
    Last Post: 19-07-2009, 12:18 PM
  5. NEW MEMBER: Hello from Italy
    By franc33 in forum New Member Introductions
    Replies: 1
    Last Post: 29-03-2009, 06:49 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •