Thread: Problems with lathe
Threaded View
-
21-08-2022 #1
Hi out there. I am hitting a few problems with a lathe I am trying to convert. It all started when I tried to calibrate the lathe in mach3 ( what a total pain that this). Anyway trying to make the stepper motors move .5mm lead to this problem. Ok they would move the distance maybe three times before cutting out and it took turning off the power to the break out board and drivers for a time before the motors would move again, then the same would happen. I am using one of the 100khz breakout boards from Amazon. One of the stepper motors is a 6amp closed loop system using a CL86T driver and a nema 34 motor. The other motor is the motor which came with the lathe which is nema motor but is 8 wires into 4 configuration. The power supply is a 24vdc. So any ideas on the cutting out.
I am also trying to get information on Linux, is this a better system for lathes, if so what board do I need, I am running usb windows 10 64bit. Is calibrating the lathe easier then the nonsense in mach3 turn. I am in the U.K. thanks
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Harrison Alpha 330 lathe Fanuc 21it SRAM back up problems
By Sucram in forum General DiscussionReplies: 14Last Post: 24-02-2021, 03:44 PM -
Harrison Alpha 330 lathe Fanuc 21it Work offset and Work shift problems
By Sucram in forum General DiscussionReplies: 0Last Post: 15-12-2019, 09:44 PM -
Mach3 Problems problems problems.
By ECCO in forum Artsoft Mach (3 & 4)Replies: 18Last Post: 09-07-2016, 10:07 AM -
CNC style lathe home brew Lathe for drilling and cutting.
By Bodge in forum Lathes, Lathe Rebuilding & ConversionsReplies: 9Last Post: 18-04-2012, 10:45 AM -
Help please with warco 220 lathe motor problems
By wiggy in forum Milling Machines, Builds & ConversionsReplies: 8Last Post: 07-09-2010, 10:14 PM
Bookmarks