. .
  1. #1
    Hello everybody !

    My name is Michael, I'm a recording/mixing engineer and a part time woodworker producing bespoke specialized recording/mixing studio furniture for my fellow sound engineers colleagues.

    Until now I've used a BZT PF1410 extruded aluminium CNC to cut some parts for the furniture I build, but I've come to the conclusion that it is a really too light and imprecise machine for my needs.

    I thus want to replace it by a more robust and powerful machine, and a custom vertical machine from JazzCNC might be what I need.

    So here I am, registering here after having been a long time lurker not having enough to say to register.

    JazzCNC : I've actually already sent you an email, but having had no answer after a few weeks, I wonder if the email wasn't intercepted by some zealous anti-spam filter ?

    Cheers everyone and thanks to this great forum to exist !

    Michael

  2. #2
    Hi again,

    Was just wondering what the rules were regarding being a newcomer and PM sending ability ? I guess there must be some sort of limitation a first, as I'd like to send JazzCNC a PM but cannot find a way to do so ?

    Thanks !
    Michael

  3. #3
    m_c's Avatar
    Lives in East Lothian, United Kingdom. Last Activity: 4 Hours Ago Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 2,815. Received thanks 346 times, giving thanks to others 8 times.
    I emailed Dean before Christmas and still have not had a response, so I suspect he's just busy.

    Probably best to try giving him a call, and for maximum attention, tell him how good* PG Tips tea is

    As for PM,s IIRC you have to reach 10 posts on the forum, or the admin might activate it before then if they're feeling generous.



    *In case you're not aware, he's a Yorkshire man, and they have a naturally ingrained hatred of anything other than Yorkshire tea
    Avoiding the rubbish customer service from AluminiumWarehouse since July '13.

  4. #4
    Quote Originally Posted by Maikol View Post
    Hi again,

    Was just wondering what the rules were regarding being a newcomer and PM sending ability ? I guess there must be some sort of limitation a first, as I'd like to send JazzCNC a PM but cannot find a way to do so ?

    Thanks !
    Michael
    This is his email dean@jazzcnc.co.uk
    ..Clive
    The more you know, The better you know, How little you know

  5. #5
    Hey thanks m_c and Clive !

    Yes I did send him an email some time ago at the address Clive mentions, but I guess he's just very busy.

    Should give him a call, no forgetting the mentions you recommended m_c !

    Cheers,
    M

  6. #6
    Quote Originally Posted by Maikol View Post
    Hey thanks m_c and Clive !

    Yes I did send him an email some time ago at the address Clive mentions, but I guess he's just very busy.

    Should give him a call, no forgetting the mentions you recommended m_c !

    Cheers,
    M
    I have sent him a screen shot . He will contact you
    ..Clive
    The more you know, The better you know, How little you know

  7. #7
    Thank you so much Clive !

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Guitar Building with my JazzCNC machine
    By BeeceUK in forum Woodworking Project Showcase
    Replies: 19
    Last Post: 26-09-2021, 10:53 PM
  2. Replace bearings in BK12 & BF12 fittings
    By Desertboy in forum Linear & Rotary Motion
    Replies: 8
    Last Post: 31-03-2020, 06:57 PM
  3. Jazzcnc, the right choice in a custom made machine
    By alex wight in forum General Discussion
    Replies: 17
    Last Post: 18-10-2016, 07:39 PM
  4. Replies: 4
    Last Post: 08-11-2014, 12:52 PM
  5. What metalwork lathe should I get to replace Sieg C3
    By Jonathan in forum Milling Machines, Builds & Conversions
    Replies: 7
    Last Post: 28-02-2011, 01:41 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •