. .

Thread: stuck need help

Page 1 of 2 12 LastLast
  1. #1
    Hi all
    any ideas how to do a fix . My cnc has been turned off for about 12 months due to personal circumstances and now i am back at it , so turned it on and everthing works but the machine aint moving , the steppers are exited and i write a program and it loads to mach 3 but i can not do anything with the machine ( jog ) nothing has been changed or anything it just wont move now any ideas anyone
    please.

  2. #2
    Have you checked that there is power to the control unit and steppers?

  3. #3
    Hi
    Yes there is power to the unit as the machine fires up ok and the stepper motors are all locked ready to work

  4. #4
    Is the esto button flashing?

  5. #5
    Hi There
    Yes the estop is flashing

  6. #6
    in my mach3 when i load mach3 a window comes up asking me what port i want to use it has never done that before and i have tried using every port but still no movement

  7. #7
    What motion controller do you have? Parallel port? If the estop is flashing try clicking on it

  8. #8
    Just clicked on the estop and still no movement .
    When i load mach3 a window comes up that says YOUR SYTEM IS SHOWING MORE THAN ONE CONTROL DEVICE PLEASE PICK THE ONE YOU WOULD LIKE THIS PROFILE TO USE.
    NORMAL PRINTER PORT OPERATION
    BSMOTION _V2.0
    OR NO DEVICE

  9. #9
    Am using a data cable

  10. #10
    What sort of data cable and where is it connected? But try selecting the second.

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. NEW MEMBER: Hi there Old D&T teacher stuck !!
    By shindax in forum New Member Introductions
    Replies: 2
    Last Post: 27-09-2019, 11:12 PM
  2. Stuck morse taper
    By dfox1787 in forum Lathes, Lathe Rebuilding & Conversions
    Replies: 13
    Last Post: 12-09-2018, 02:00 PM
  3. Laptop stuck in BOotmgr missing
    By dazza in forum Laptops & Tablets
    Replies: 8
    Last Post: 28-02-2016, 07:08 PM
  4. feedrate stuck on low
    By routercnc in forum Machine Discussion
    Replies: 1
    Last Post: 24-04-2014, 10:24 PM
  5. 250mW LASER stuck on
    By korky in forum General Electronics
    Replies: 10
    Last Post: 12-07-2009, 10:47 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •