. .
Page 4 of 4 FirstFirst ... 234
  1. #31
    Nearest that I have found is HTS this is for a RPP profile http://www.martinsprocket.com/2001/SecKb.pdf#J74 will do some measurements when I go down to the workshop.
    Peter

  2. #32
    Quote Originally Posted by ptjw7uk View Post
    Nearest that I have found is HTS this is for a RPP profile http://www.martinsprocket.com/2001/SecKb.pdf#J74 will do some measurements when I go down to the workshop.
    Peter
    please let us know what u come up with!!
    thanks again tom.

  3. #33
    Tried to measure teeth but the bottom section is radiused about 3mm, so not easy to measure. Taking a resin cast at the moment to to get better measurements. Definately 8mm pitch about 25.6mm wide looking like a HTS pulley might be the one but not found any measurements to caompare to.

    peter

  4. According to Gates, RPP belts will run interchangably on RPP or standard HTD profile pulleys. The main difference it would seem is that the RPP profile has a dent on the top of the tooth to reduce wear and allow the tooth to sit deeper increasing the transmission properties. Are there any markings on the belt itself? Here's a PDF with tooth dimensions for a specific brand.

  5. #35
    Quote Originally Posted by BillTodd View Post
    Export as bmp then use Serif PhotoPlus to convert to JPG
    Or install Draftsight as a freebie.

  6. #36
    Quote Originally Posted by boldford View Post
    Or install Draftsight as a freebie.
    2 year ago that mate sure he'd have found something better by now.!

  7. #37
    Sawa's Avatar
    Lives in Borovichi, Russian Federation. Last Activity: 28-02-2021 Has been a member for 1-2 years. Has a total post count of 1.
    My idea for a cheap linear cable drive over long distances.

Page 4 of 4 FirstFirst ... 234

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Belt drive on a router
    By John S in forum Rails, Guideways & Bearings
    Replies: 23
    Last Post: 10-09-2012, 09:39 PM
  2. WANTED: wanted drive belt and pulleys
    By oadamo in forum Items Wanted
    Replies: 2
    Last Post: 13-05-2011, 09:00 PM
  3. any one know where to get a belt drive convertion for x2
    By Scott in forum Sieg Milling Machines
    Replies: 15
    Last Post: 27-09-2010, 08:44 PM
  4. Standard Drive Belt Size ?
    By Lee Roberts in forum Belt Drive, Pulleys & Timing
    Replies: 2
    Last Post: 19-05-2009, 10:56 AM
  5. Re: Standard Drive Belt Size ?
    By HS93 in forum Belt Drive, Pulleys & Timing
    Replies: 0
    Last Post: 18-05-2009, 03:30 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •