. .

Thread: Hi to everyone

  1. #1
    Hi to all at mycncuk, looking to get started building soon, background in electronics, pcb design and make, (manual and cad). Looking for a few inexpensive stepper motors to play around with, i intend to control them using pic (picaxe) micro. based in glasgow, anyone near by that i can purchase some surplus motors from, i'd be glad to travel and collect if it's not to far.

    Thanks in advance, Wildbill.

  2. #2
    Hi bill, i'v got 3 motors that have seen very little use if you would like them?

    Welcome to the site!
    .Me

  3. #3
    Hi Lee, thanks for the response. i have started building the gantry and table, 100cm X 50cm table, i have also made some linear bearings, so i guess the motors need to be quite small, i intend using a small (850 watt) router or a dremmel. I'm reading some stepper theory and i will build the drive board (not for cost reasons but because i enjoy doing stuff !!). What size are your motors and what cost ? do you think they would be suitable give the sizes mentioned above ?

    Wildbill.

  4. #4
    Hi i will send you a PM with the info on the motors now.
    .Me

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •