Page 1 of 2 12 LastLast
  1. #1
    Hi,

    I have a need for around 7 meters of open ended (i.e. off the roll) 10mm wide T5 Polyurethane belt. I have found a US source at a sensible price, see here http://shop.polybelt.com/10T5-Open-E...-B10T5-MPS.htm but unfortunately no shipping to the UK. Does anyone have a sensibly priced UK source they have used ?

    Cheers, Cam.

  2. #2
    jonm's Avatar
    Location unknown. Last Activity: 19-06-2011 Has been a member for 7-8 years. Has a total post count of 89.
    hi cam
    have looked for open ended timing belt in uk before , and could only find this, its not t5 http://www.motionco.co.uk/timing-bel...-25_38_49.html

  3. #3
    jonm's Avatar
    Location unknown. Last Activity: 19-06-2011 Has been a member for 7-8 years. Has a total post count of 89.
    cam
    another option is here not open ended belt but couldnt you get a long belt and cut it http://www.bearingboys.co.uk/Timing_Belts-1039-c

  4. #4
    John S's Avatar
    Lives in Nottingham, England, United Kingdom. Last Activity: 2 Hours Ago Has been a member for 9-10 years. Has a total post count of 2,049. Received thanks 138 times, giving thanks to others 44 times. Referred 1 members to the community.

  5. #5
    Might be worth being a bit careful. This was on that web site.

    Codan Rubber Limited – In Administration
    Thursday 18th February 2010
    The affairs, business and property of the company are being managed by the Joint Administrators who act as agent for the company without personal liability
    G P Bushby and M Wild are licensed to act as insolvency practitioners in the UK by the Institute of Chartered Accountants in England and Wales (IP numbers 8736 and 9300 respectively)

  6. #6
    Thanks for the links, unfortunately I can't cut a belt because I can't find one long enough. I need an axis travel of 1 meter, therefore I need a belt just over 2 meters. The http://www.roulunds.co.uk/ web site looks the best, but the price is still much higher than the US one. I think I may contact the US guys and see if they are prepared to ship to the UK. I will let you know how it goes.

    Cam.

  7. #7
    Mel
    Just to clarify was it MOTIONCO that is winding up? as there it where i am getting my belt from for my build.

    TNX
    If the nagging gets really bad......Get a bigger shed:naughty:

  8. #8
    I think it was http://www.roulunds.co.uk/ they have Codan plastered all over their web site.

  9. #9
    Thats a relief
    If the nagging gets really bad......Get a bigger shed:naughty:

  10. #10
    Sorry. I should have made it clear. On the Roulunds web site it shows the history and they are Codan one and the same. I cut and pasted direct from http://www.roulunds.co.uk/ .

Page 1 of 2 12 LastLast

Similar Threads

  1. Open Source Servos
    By D.C. in forum Open Source Designs & Plans
    Replies: 0
    Last Post: 07-03-2013, 07:29 PM
  2. Open Rail, open source linear rail?
    By Musht in forum Open Source Designs & Plans
    Replies: 0
    Last Post: 15-06-2012, 12:21 PM
  3. SHAPEOKO, the open source CNC
    By baz550 in forum Open Source Designs & Plans
    Replies: 6
    Last Post: 31-05-2012, 08:59 PM
  4. Open Ended Timing Belts
    By psiron in forum Gantry/Router Machines & Building
    Replies: 0
    Last Post: 11-06-2010, 10:55 PM
  5. Open source group project, anybody interested?
    By Wotsit in forum Open Source Designs & Plans
    Replies: 28
    Last Post: 15-12-2009, 01:05 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •