Thread: help please with first attempt
Threaded View
-
31-05-2010 #11
sounds like you're missing an enable somewhere... when you power up can you turn the motor shaft by hand or is it locked? you shouldnt be able to turn it if the motor is powered up right... (assuming you can turn it when its not powred!)
see the note on charge pump and enable on page 4 of the System4 manual. Have you permanently enabled it, or have you configured a chargepump in Mach3?
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Plasma Attempt #2
By Robin Hewitt in forum DIY Plasma Build LogsReplies: 21Last Post: 02-09-2012, 08:05 PM -
ok, first attempt using sketchup 8
By deannos in forum Gantry/Router Machines & BuildingReplies: 89Last Post: 25-08-2012, 03:00 PM -
BUILD LOG: My first attempt.... 8 x 4
By trounce in forum DIY Router Build LogsReplies: 0Last Post: 18-10-2011, 11:31 AM -
BUILD LOG: My First Attempt Of A CNC
By AdCNC in forum DIY Router Build LogsReplies: 61Last Post: 21-10-2010, 03:55 PM -
FeatureCam - first attempt
By HiltonSteve in forum CAD & CAM SoftwareReplies: 0Last Post: 01-09-2009, 07:46 PM
Bookmarks