. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. Hi guys,
    I have been mooching about the web for a while and found this site, it's nice to find a UK based group.

    I am an electronics guy at heart but have been a programmer for a number of years, but still have hankerings to things that work by the magic smoke. I have never been too keen on making pcb's with the acid etch, so I thought of a cnc mill for them.

    A friend and I are looking at a couple of Taiwanese units on Fleabay, but I fancy a bit of a bash at making one myself; Although probably quite basic and possibly not up to the job of pcb milling! my woodworking/ metalworking skills are average, so lets see.

    -Jim

  2. #2
    Greetings Jim, is it still raining up there ?

    .
    John S -

  3. Actually I'm NW of manchester (nearer Bolton but I say manchester as people know where that is!), we had a generally good weekend/week, but I work in Altrincham and the weather was pretty bad.

    The short answer I could have used would be, yes :D

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. NEW MEMBER: Hi, from sunny Manchester...
    By Skysurfer in forum New Member Introductions
    Replies: 0
    Last Post: 02-03-2014, 10:14 PM
  2. NEW MEMBER: Hey from manchester
    By craigrobbo in forum New Member Introductions
    Replies: 1
    Last Post: 01-05-2012, 06:38 PM
  3. NEW MEMBER: Hello from Manchester
    By Pro Mod in forum New Member Introductions
    Replies: 3
    Last Post: 01-05-2012, 06:33 PM
  4. NEW MEMBER: Hello from Manchester!
    By Dopy in forum New Member Introductions
    Replies: 1
    Last Post: 19-10-2010, 01:24 AM
  5. NEW MEMBER: Hello from Manchester
    By electricwizard in forum New Member Introductions
    Replies: 4
    Last Post: 26-08-2010, 02:08 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •