Thread: CNC plasma contract
We are currently looking for guys who have a cnc plasma cutter or even better a laser.
The job is to cut 20 of each flange and then the same file again without the ID
The cut must be smooth as these are manways and personel are climbing in and out of them.
The material that is to be used is 10mm mild steel.
Can i just say.. and this is very important! we can go through 40 complete manways in 1 MONTH if not sooner!!!! this could be a great little paying job for someone. but MUST complete on time.
reason i am posting here is because our current supplier is starting to get a bit sloppy and im a fair beliver of giving people a chance!
to download the file please click here
If you are interested in this job or have any questions please contact me VIA PM
What Version DWG is it?
I tried it on the CAD programs I have at home and none of them can read it
Sorry about that i dont know why it will not open.. whilst i can draw CAD im not a guru lol the version i was using is autocad 2010, but was saved as a 2007.
Please download image from HERE as i cant seem to uploads the picture :whistling:
Could you not make the ring in two halves and weld them back together?
It would save you a lot in material costs.
If you made them as shown 40 of each would use approx. 14 sheets of 3000 x 1500
If you split the ring it would save you approx. 4 sheets of material
Just a thought......
Unfortunatly not mate
Why don't you tout the drawing round a few companies and compare prices.
It's highly unlikely that anyone of this forum has a machine big enough or the capability to handle full sized 10mm plate.John S -
Piece of cake, a 3000mm x 1500mm x 10mm sheet only weighs 354kg (780lb)
I'll leave it up to you to buy and handle 14 plates, only 4.8 tonnesJohn S -
If it helps a batch of 10 of each would be ok lol
By Walterronny in forum DIY Plasma Build LogsReplies: 30Last Post: 20-02-2013, 01:13 AM
By petesurrey in forum Opportunities Available & SoughtReplies: 0Last Post: 13-09-2012, 10:06 AM
By Lee2011 in forum Opportunities Available & SoughtReplies: 0Last Post: 31-05-2011, 03:12 PM
By Excel in forum Opportunities Available & SoughtReplies: 0Last Post: 22-02-2011, 03:41 PM
By jamied in forum Computer SoftwareReplies: 6Last Post: 20-08-2010, 02:33 PM