. .
Page 46 of 82 FirstFirst ... 36444546474856 ... LastLast
  1. #451
    Quote Originally Posted by Neale View Post
    Does the cordless drill have step/dir inputs to drive directly from Mach3?
    Good old brain to finger inputs only...
    Neil...

    Build log...here

  2. #452
    Sometimes the best way! Take those damned computers out of the loop...

  3. #453
    I'm a child of the 70's.....so going to use it like an etch a sketch!
    Neil...

    Build log...here

  4. #454
    The original MPG! Now, there's another idea for a CNC router enhancement...

  5. #455
    Just a bit more painting last thing this afternoon is all I managed...



    Did do a bit of research on the electronics today so will post up what I think I need when I've finished researching.
    Neil...

    Build log...here

  6. #456
    If you don't paint it now you'll never paint it
    Spelling mistakes are not intentional, I only seem to see them some time after I've posted

  7. #457
    Quote Originally Posted by EddyCurrent View Post
    If you don't paint it now you'll never paint it
    That was my thinking...
    Neil...

    Build log...here

  8. #458
    Coming along nicely Neil. Can't wait to see this one finished.

  9. #459
    Quote Originally Posted by IanS1 View Post
    Coming along nicely Neil. Can't wait to see this one finished.
    Cheers Ian, I can't wait either...it's only been about 4 years in the making!!
    Neil...

    Build log...here

  10. #460
    Quick assemble of the gantry this morning. Got the holes for the X axis ballnut holders to machine later on the Y axis endplates, then some pads to make for the ballscrew ends...



    Thinking about it I'll make the pads first and then see if I need to machine back the Y axis end plates...
    Last edited by njhussey; 23-02-2015 at 02:12 PM.
    Neil...

    Build log...here

Page 46 of 82 FirstFirst ... 36444546474856 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 9 users browsing this thread. (0 members and 9 guests)

Similar Threads

  1. Does anyone want to build me a cnc router?
    By totally useless in forum Open Source Designs & Plans
    Replies: 25
    Last Post: 05-05-2014, 12:44 AM
  2. My new, and first build....comments greatfully received
    By berk in forum Gantry/Router Machines & Building
    Replies: 7
    Last Post: 12-01-2014, 03:15 PM
  3. BUILD LOG: CNC Router New Build
    By PilotTom in forum DIY Router Build Logs
    Replies: 12
    Last Post: 25-05-2013, 03:49 PM
  4. BUILD LOG: A3 Router Build
    By GTJim in forum DIY Router Build Logs
    Replies: 6
    Last Post: 17-02-2012, 12:53 PM
  5. CNC construction TUNISIA give your comments
    By ali hedi in forum Gantry/Router Machines & Building
    Replies: 5
    Last Post: 06-07-2011, 11:58 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •