Comments sought on new build: A CNC Router for RC Gliders and Planes

[njhussey]

OK so the draught excluder is here now.



Will have a play with the epoxy sometime soon. Will level the angle that I'll be using to space the x axis rails out with a little like the pictures below. This will let me play with the epoxy and get used to mixing and pouring it and also give me a nice level surface to mount the carriages to.



The bridge between the two rails will be silicone sealant, all the foam will be stuck together and the MDF end boards will be no-nailed to the steel.



I'm seriously thinking of welding two steel 100x50x4 sections in an L shape and getting the machine up and running that way. I'll use epoxy on the steel to level the Y axis rails so they're level.