. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. Something to be aware of, I was using 6mm wall Al box section from Aluminiumwarehouse.co.uk. It was pretty straight, but slightly twisted. so that in 1m, on a 50mm box one side was about 0.5mm off the supported round rail. At the moment I have just built the thing, which I will probably regret later, though it is not the worst issue with the machine.

  2. The Following User Says Thank You to daveshorts For This Useful Post:


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Box section tube straightness
    By jimbojones1000 in forum Metalwork Discussion
    Replies: 7
    Last Post: 18-02-2014, 04:11 PM
  2. Maximum size of box section, Stacking box section, Construction Angle
    By andy586 in forum Gantry/Router Machines & Building
    Replies: 0
    Last Post: 01-02-2013, 05:29 PM
  3. Help with name of aluminium section plz
    By Fivetide in forum Milling Machines, Builds & Conversions
    Replies: 2
    Last Post: 02-12-2012, 10:01 PM
  4. Aluminium box section
    By martin54 in forum Gantry/Router Machines & Building
    Replies: 11
    Last Post: 28-10-2012, 01:13 AM
  5. spindle cross section view
    By routercnc in forum Tool & Tooling Technology
    Replies: 20
    Last Post: 05-08-2011, 12:55 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •