. .

Thread: first go

  1. #1
    hi all
    don't laugh it is my first attempt and i think know were i went wrong.Click image for larger version. 

Name:	IMAG0106.jpg 
Views:	325 
Size:	543.0 KB 
ID:	2872


    andy

  2. #2
    Good start and very patriotic! Looks like you need to either:
    Set a 'safe Z' height in the software where the tool knows it is clear of the workpiece (I use 20mm) before it jogs to the next cutting location
    Check your drawing, toolpath, or gcode to see if you have lines joining where they shouldn't
    Check you are not loosing steps

    If you get stuck, post a video or description and someone will get you going.

    Watch that MDF dust as well, bad for you!
    Building a CNC machine to make a better one since 2010 . . .
    MK1 (1st photo), MK2, MK3, MK4

  3. #3
    hi all
    first off a massive thank you to i2i for converting my machine,he done a great job.
    so here is a little vid of the beast running.
    andy

    sorry for video first go next 1 will be better.
    Last edited by windows20; 22-10-2010 at 05:13 PM. Reason: bad video

  4. #4
    hi all
    had play with the machine last few days.got the first stage of the vacuum bed sort.
    going to make a few boxes next to hold different sizes of work.
    hope you like
    andy




Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •