1. #1
    I am posting a base design for my next router build the bed is a fixed height from the floor and the router can be adjusted to allow for larger work. this router is 2' x 4" allowing for a full sheet 4' x 8 to be indexed through it. I will use my plasma CNC to cut the end panels. It has min. welding. Each of the 3" x 3" uprights are fixed to the end panels in two planes perpendicular to each other.
    Attached Thumbnails Attached Thumbnails my design-Model.pdf  

  2. #2
    sorry i attached the wrong file

  3. #3
    I attached the wrong file
    this is the right one
    Attached Thumbnails Attached Thumbnails base design.pdf  

Similar Threads

  1. Vertical router design
    By EddyCurrent in forum Gantry/Router Machines & Building
    Replies: 12
    Last Post: 29-03-2014, 10:43 PM
  2. My second router design
    By Joe in forum Gantry/Router Machines & Building
    Replies: 14
    Last Post: 03-05-2013, 06:07 PM
  3. Router design thoughts
    By m_c in forum Gantry/Router Machines & Building
    Replies: 21
    Last Post: 11-09-2012, 07:06 PM
  4. Design help etc required with DIY CNC Router Design / Build
    By MikeyC38 in forum Gantry/Router Machines & Building
    Replies: 12
    Last Post: 21-10-2011, 04:50 PM
  5. Need 6' x 4' bed, 4 axis router design.. Help..!
    By fasteddy in forum Gantry/Router Machines & Building
    Replies: 29
    Last Post: 17-09-2010, 12:56 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •