Thread: New Member

  1. #1
    Greetings to all, from Texas, USA.

    I just discovered this forum and find that a lot of the subjects that I am interested in
    are covered here.

    I have used a manual mill and lathe for a number of years, and have decided to build a cnc router. So many different ideas to consider!!

    I am determined to build a dual purpose machine, for example wood router or plasma
    cutter by simply changing out the Z-Axis Fixture. Mach3 seems to be capable of running
    diffrent setups, so that is what I shall use.

    I started to limit my work area size to 24 X 36 inches, but may exapnd to 4 x 4
    before I start actual construction.

    Will try to post some concept pictures in the near future.

  2. Hi Canewb and welcome to the site. Look forward to seeing your ideas..


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts