Gents,

I have Mach3 taking to my router but how do I get it to perform a test cut? I have a G-Code file loaded on screen, which appears to be off set from the 300x400 table set in Mach3. Also when I start the file the machine seems to head off and do its own thing.

I may have missed something in the set up?

Any help or guidance would be apprecaited.

Also I noticed that the machine coordinates are away from the table. Im not using home switches as I await fitting these and cannot see how to re-reference the machine.

I have all this great software, machine, bit and material and cannot output anything yet! Arrgghh.!!!