Thread: From, Liege Belgium
Hello from Belgium Europe,
We have make with succesful modification Z axes on SX3, reduction 2/1 and Nema 34 size motor and gas spring from CNCFUSION + de luxe kit & héli-call.
Patrick from a2p (a2p.be)
Last edited by irving2008; 15-09-2010 at 04:33 PM.
Thanks for your response and re-posted, sorry i have not understand for introduction.
For introduction i thing:
We are some friends here in Belgium near Liege have a passion to cnc retrofit mill and lathe, not commercial in this moment, perhaps in an other live..
We retrofit now an SX3 with long travel table (RC20BFN) from RC-Machine (Luxembourg) with CNCFUSION kit and Mach3.
We continue different experimentation wtih Pokeys55, MPG, different motor size, step, dc, brushless, enclosur etc...
We have a little site on http://www.a2p.be.
We explain the result off ower experimentation and futur way we expect go.
A2P come from the 3 first member Alan, Patrick & Patrick, they have experience in different interesant CNC way, - mechanical, electronic, cnc gcode and machine user etc...
We are happy to come on machinist community MYCNCUK.
NEW MEMBER: newcomer from BelgiumBy skyhawk in forum New Member IntroductionsReplies: 1Last Post: 12-12-2010, 03:22 PM
NEW MEMBER: hello from belgiumBy johan jorez in forum New Member IntroductionsReplies: 1Last Post: 06-12-2010, 11:42 PM
NEW MEMBER: Greetings from Belgium...By D-Work in forum New Member IntroductionsReplies: 1Last Post: 07-09-2010, 07:17 AM