. .
  1. #1
    Hi guys
    i am in the middle of converting my mill to beltdrive x2 replica of sorts cheap chineese thing
    basicly the motor on it is a load of crap im on my second one lol first one the winds came off

    thing is i have a brushed servomotor sat here rated at 2500-3000 rpm 90v
    it about the same diamited of my old motor but twice as long also have driver and encoder
    but i take it a brushed servo is just a quality DC motor untill you use drivers and encoders

    failing that i have a 240v ac lathe motor little bigger in size compaired to the stock motor on my mill but not that much 2700rpm

    would like to use the servo motor with drivers /encoders if poss
    just want your thoughts???

  2. Interesting idea as i was considering using a servo motor for my next machine, i know the use them on big vmc's but its finding a servo motor that will have a good top rpm as a lot of brushless servos only go to around 3-4k mark failing that you could always 1:2 belt gearing to get 6-8k out of it but i suppose your sacrificing torque..

    There is another option, using a vector motor... but i don't know that much about them (yet anyways)

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. AC servo motor help !
    By rnr107 in forum Stepper & Servo Motors
    Replies: 35
    Last Post: 10-08-2015, 02:37 PM
  2. Replies: 2
    Last Post: 23-04-2014, 03:14 PM
  3. What size servo motor do I need.
    By Jonathan in forum Stepper & Servo Motors
    Replies: 1
    Last Post: 31-03-2014, 09:16 PM
  4. 2.2kw servo motor for spindle
    By blayde in forum Spindles & Drive Motors
    Replies: 1
    Last Post: 01-01-2014, 04:48 AM
  5. Sourcing a servo motor. Help!
    By oscar in forum Marketplace Discussion
    Replies: 2
    Last Post: 22-08-2013, 01:06 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •