1. #1
    Theo's Avatar
    Lives in Assen, Netherlands. Last Activity: 21-10-2010 Has been a member for 6-7 years. Has a total post count of 4.
    Hello,

    I'm Theo Schoorl. After years of using templates to cut foam wings and model aircrafts i decided to make my own cutter. I don't know much about CNC and electronics.
    After some search-work on the internet i bought a 4 axis controllerboard and some steppermotors (Nema23)
    The software i want to use doesn't work with my TB6560 board. It need some modification to get it work.
    I need some help there and saw a thread in this forum with some great tips and want to join this discussion. Maybe i can help other model aircraftbuilders after then with my experience and create a standard setup manual with this configuration.

    thanx
    Theo

  2. #2
    Hi,

    Welcome to the site, your membership has been approved and you now have full access.

    Sorry for the delay,

    Lee
    .Me

Similar Threads

  1. NEW MEMBER: New member from the netherlands
    By steamy in forum New Member Introductions
    Replies: 1
    Last Post: 22-11-2010, 05:28 PM
  2. NEW MEMBER: New from The netherlands
    By Bert in forum New Member Introductions
    Replies: 4
    Last Post: 21-10-2010, 08:49 AM
  3. NEW MEMBER: New member from The netherlands Oudenbosch
    By Bert in forum New Member Introductions
    Replies: 1
    Last Post: 19-10-2010, 12:24 AM
  4. NEW MEMBER: Hello from Netherlands
    By Dvane in forum New Member Introductions
    Replies: 1
    Last Post: 03-10-2010, 09:59 PM
  5. NEW MEMBER: Hello from the Netherlands
    By erikkate in forum New Member Introductions
    Replies: 1
    Last Post: 03-10-2010, 09:57 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •