1. #1
    Hi all, thanks for the invite to join forum!
    I did an apprenticeship in tool jig and die making a few years ago prior to moving to England and my experience with machining is all manual, based on vertical and horizontal machines along with a few other things such as surface grinding, horizontal shapers and radial arm drilling machines. I'm currently working as a maintenance technician (mechanical) on an automated distribution system and thought I'd make use of my experience and give CNC a go at home!

    I'm in the process of cnc'ing a sieg x1 micro mill with a kit from motion control products and so far I'm making fairly good progress. I look forward to chatting with other members and sharing info!

    The forum looks good, best of luck going forward!

  2. Hi Peteski,
    Nice to see another member.
    There is a lot of good information here and a friendly bunch of people.


  3. Hi welcome to the forums, and thanks for the kind words i look forward to viewing your progress with the conversion.

  4. #4
    Hi Peteski!

    Welcome to the forum. I'm 90% of my way through building my CNC Router. Friendly bunch of pepole here and lots of good advice.
    Nothing is foolproof......to a sufficiently talented fool!

Similar Threads

  1. NEW MEMBER: Hi from swindon
    By Swarfing in forum New Member Introductions
    Replies: 4
    Last Post: 29-08-2009, 07:17 AM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts