Hybrid View
-
30-08-2008 #1
Thanks Gary...that's one issue-ette addressed (I really couldn't stomach getting involved with measurements such as eleven thirtytwo'ths)
Here's the Rockcliff blurb....
" with our refined plans I have gotten Homemade CNC down to an art, , the plans and instructions we sell today did not appear overnight and have been refined and tweaked over a ten year period, so purchasing our plans today you will feel confident building your DIY CNC router that your finished machine will perform as advertised"
Yet, time & time again...I read of users changing the plans! That would bug me...ie shelling out for the "10 year honed plans"...only to find I have to change/enhance them!
This guy seems to know what he's doing (3 pdf files of his erhmm 'modified' Rockcliff build)...
http://www.cnczone.com/forums/attach...5&d=1198415032
http://www.cnczone.com/forums/attach...9&d=1201795716
http://www.cnczone.com/forums/attach...5&d=1204908004
(not sure if you need to be a CNC-Zone member & logged in to download the above or not)Last edited by HankMcSpank; 30-08-2008 at 12:44 AM.
-
30-08-2008 #2
People change them not because they are not that well thought out, but because every machine is different.
Also people decide that they are going to use different materials like ballscrew instead of leadscrew, and this needs different mountings, they may prefer to use profiled rail rather than bar and so on, also the rockcliff plans are for people on a budget, so most of the time, people upgrade it to be more ridged.
Visit Us: www.automationshop.co.uk
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Vacuum pump for a large matrix bed cnc 5 by 10 foot
By gavztheouch in forum General ElectronicsReplies: 4Last Post: 03-11-2013, 06:01 PM -
Dust and Chip extraction for large matrix table machining centre.
By gavztheouch in forum Dust Extraction & CollectionReplies: 2Last Post: 29-05-2013, 10:03 PM
Bookmarks