Hi Guys, I have been really struggling for time to get my machine finished as work is a bit manic at the moment.
I need somone to finish my conversion, so far I have the machine setup and working with mach3, x and z axis's work fine, spindle works but not sure the encoder is working 100% as it displays the speed then goes 0 then displays the speed...
The tool turret works but it spins to fast for the software to react quickly resulting in tool changes taking upto 10 minutes. Either the inverter/motor needs sorting to run slower or a stepper motor needs fitting and setting up.
Home and limit switches are connected to a second parallel port but need final setting up in Mach3.
Coolant system needs connecting to 1 of the spare relays and setup with Mach3.
Final testing of the machine and test cuts to be performed.
Full original schematic availible.
CONVERSION: Denford Triac Mach3 conversionBy rnr107 in forum Conversion Build LogsReplies: 11Last Post: 23-10-2014, 01:44 PM
By Nick Butler in forum Items For SaleReplies: 19Last Post: 21-08-2013, 10:20 PM
FOR SALE: Denford Starmill coverted to Mach3By Kai in forum Items For SaleReplies: 0Last Post: 02-06-2011, 11:30 AM
By CHudson in forum Items For SaleReplies: 3Last Post: 18-02-2011, 11:11 PM
By CHudson in forum Computer SoftwareReplies: 11Last Post: 17-06-2010, 07:30 PM