1. #1
    Hi , Im down in the South Island of New Zealand, summer is coming and Ive found an interesting new website.

    My CNC experience isnt very much , I had a RF20 round coloum mill that I put steppers onto , worked ok but I ended giving it to a friend who needed it more than me, about the same time I bought an Induma 1/S mill which Im still trying to decide if I want or need to cnc it.

    When i did the RF20 I used Gecko drivers and they seemed to work fine. I helped another friend convert a Bridgeport clone with some servos and the Red gecko's, it was a much better machine than my wee RF20.

    My interests are mostly related to motorbikes and bike racing , so most stuff I make is pretty dull to look at but has a purpose that pleases me.

    Cheers
    Mike

  2. #2
    Hi,

    Welcome to the site, your membership has been approved and you now have full access.

    Lee
    .Me

Similar Threads

  1. NEW MEMBER: New guy from Faroe Islands
    By cleanmachine in forum New Member Introductions
    Replies: 2
    Last Post: 08-09-2011, 10:52 AM
  2. NEW MEMBER: Hello from New Zealand
    By joshendy in forum New Member Introductions
    Replies: 1
    Last Post: 23-12-2010, 10:22 PM
  3. NEW MEMBER: Hello from New Zealand
    By bruceg in forum New Member Introductions
    Replies: 1
    Last Post: 15-12-2010, 10:43 AM
  4. NEW MEMBER: Hi from New Zealand
    By lukeb in forum New Member Introductions
    Replies: 4
    Last Post: 20-08-2010, 05:39 AM
  5. NEW MEMBER: hi from new zealand
    By lobster in forum New Member Introductions
    Replies: 1
    Last Post: 22-11-2009, 10:34 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •