1. #1
    Hi, this will be my first build so i have decided to go with the following-

    I have already bought the plans, just in the middle of converting everything to metric. I will be mainly cutting MDF, soft wood and some hard woods. For the electronic side of things i have seen this kit-

    But i understand from reading on this site that it is preferable to use separate boards in case things go pop. Is there a cheaper alternative for a complete novice to use
    Last edited by irving2008; 14-11-2010 at 10:24 AM. Reason: corrected link

  2. Your electronics kit link is wrong...

  3. You might have a look at www.diycnc.co.uk for an alternate electronics configuration

  4. #4
    Sorry about that the link should be

Similar Threads

  1. NEW MEMBER: Im new, am a 3D designer. Need a New cnc machine and need advice and guidance
    By FlyHighRC in forum New Member Introductions
    Replies: 134
    Last Post: 09-06-2014, 11:28 PM
  2. Control Panel Guidance
    By GTJim in forum General Electronics
    Replies: 2
    Last Post: 03-09-2013, 07:42 PM
  3. Or Guidance ;) Connection Name(s)
    By Carlb1058 in forum Marketplace Discussion
    Replies: 6
    Last Post: 12-07-2013, 11:48 PM
  4. NEW MEMBER: Old guys who need guidance
    By silvasurf in forum New Member Introductions
    Replies: 1
    Last Post: 25-02-2013, 08:12 PM
  5. Guidance please ...
    By Wobblybootie in forum General Electronics
    Replies: 4
    Last Post: 13-11-2010, 12:30 PM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts