Thread: Sunny Middlesex
Hybrid View
-
17-11-2010 #1
Hi my name is Phil, I am an ex toolmaker, I have built/converted a mill and a lathe to cnc.
The lathe is a Harrison M250 the mill is an RF31.
My home shop also has a large metal horizontal bandsaw, no 8 flypress, Bridgeport series II mill, J & S 540 surface grinder with optidress, Myford MG12 universal grinder, Clarkson tool & Cutter Grinder. The only thing i do not have much of is free space. :lol:
A future project is to cnc the cutter grinder.
Maybe i can help some others out.
-
17-11-2010 #2
Hi Phil, and welcome to the site. Nice shop you have there... sounds like you've been there n done it... would be interested in your RF31 conversion, probably similar to my MD30 (when I get the time!). Whereabouts in Middx, over my way or the other end?
-
17-11-2010 #3
Hi irvin2008
I'm in the northern end of Middlesex.
I only have the machine assembled and working, no build pictures.
The Z axis was the most problemataic as the quill had .5mm + slop in the head casting.:cry:
The fix is/was not for the squeamish. I'll go and have a look at an MD30
So yeah I've done a lot, but I'm still learning.
Phil
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
NEW MEMBER: Hi from sunny Somerset.
By Doc in forum New Member IntroductionsReplies: 8Last Post: 07-02-2014, 06:45 AM -
NEW MEMBER: Hello from sunny Romford
By Bustercnc in forum New Member IntroductionsReplies: 0Last Post: 17-07-2013, 05:37 PM -
NEW MEMBER: Hi Everyone from Sunny Nottingham
By Lancer in forum New Member IntroductionsReplies: 6Last Post: 01-07-2012, 05:53 PM -
NEW MEMBER: Greetings from Sunny Shropshire
By Fubar in forum New Member IntroductionsReplies: 1Last Post: 22-01-2011, 12:00 AM -
NEW MEMBER: New man to CNC in Sunny Shropshire......
By grizzly217 in forum New Member IntroductionsReplies: 3Last Post: 11-10-2007, 12:49 PM
Bookmarks