1. #1
    I have a Taig 4axis miller. Main use: profiling clock wheels. I have fitted my dividing head and rotary table with stepper motors, and with the use of DivisionMaster, cutting wheels with odd and large numbers of teeth is much more certain. Crossing out wheels on the rotary table now requires Gcode for one section, index the table, restart the programme, have another cup of coffee.
    I have just got the 4th axis into operation. I needed something to try it out and cut a 12 tooth 7 DP helical gearwheel (in softwood) with 17 degree twist, with just a 0.125" straight-sided slot drill. Awsome!

  2. #2
    Hi,

    Welcome to the site, your membership has been approved and you now have full access.

    Please post your questions in the correct forums for the best assistance.

    Lee
    .Me

Similar Threads

  1. NEW MEMBER: Greetings from Sunny Shropshire
    By Fubar in forum New Member Introductions
    Replies: 1
    Last Post: 22-01-2011, 12:00 AM
  2. NEW MEMBER: Hi From Shropshire
    By Steve-m in forum New Member Introductions
    Replies: 1
    Last Post: 08-09-2008, 03:19 PM
  3. NEW MEMBER: New man to CNC in Sunny Shropshire......
    By grizzly217 in forum New Member Introductions
    Replies: 3
    Last Post: 11-10-2007, 12:49 PM
  4. NEW MEMBER: Hello from Shropshire
    By Yohudi in forum New Member Introductions
    Replies: 8
    Last Post: 09-08-2007, 03:12 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •