. .
  1. #1
    Seasons Greetings to everyone, My name is Hugh, I live in the Arctic Circle (INVERNESS).
    I have no practical hands on experience of machine tools, as I cheat and tend to opt for photochemical engraving, I make Printed circuit boards, I am about to start making multi layer stack ups, I will try eight layers first. I might be able to assist some of your members with electronic related problems, I also program embedded micro controllers, in particular the Texas Instruments range of DSP's and MCU's. I found you site through a search engine
    and I am very interested in building my own Pick and Place machine, as I have just designed my Drill table I thought it might be fun to incorporate the drill with the Pick & Place, and yes I am using Image recognition to place, Full HD, cameras are only 15 Quid from Micron semiconductors (Available from Digikey), just add a TI Davinci 646,
    it can handle HD 3D as well !:tup:

  2. #2
    Hi,

    Welcome to the site, your membership has been approved and you now have full access.

    Please post your questions in the correct forums for the best assistance.

    Lee
    .Me

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •