. .
  1. #1
    Good mornnig men,

    my miller has started playing up yesterday, the speed controller was working ok untill i went for lunch,

    on return not playing ball,


    with air connected and i choose either up or down speed, but when i press the button the indicator only moves a hundred revs or so if i'm lucky then stops, if i keep pressing it in quick sucesion, the air valve is working ok, and the speed indicator judders a bit but wont move,

    also there is a lot of air escaping from what must be a safety blow off valve on the rear of the black plastic air valve housing,

    this was not happening prior to this problem as the compresser is running almost constant due to air loss

    it stikes me that this air loss is the root of the problem, so can it be a leeky seal in a the valve somewhere,

    anyone any ideas . i dont want to start dismantling the valve unitll i have more ideas of what to look at,

    btw the air brake is working fine and this shares the same air supply [obviously]

    any help would be appreciated,

    many thanks carl

  2. #2
    You got contraves speed drive on that machine?

    You mention an air leak - if you have a leak, is your compressor keeping up (is your receiver tank emptying too quickly due to the leak?)

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FOR SALE: bridgeport interact 4
    By cutter23 in forum Items For Sale
    Replies: 2
    Last Post: 01-07-2014, 12:47 PM
  2. HSM Advisor - High Speed Machining feed & speed calculator
    By magicniner in forum CAD & CAM Software
    Replies: 2
    Last Post: 20-01-2014, 12:57 PM
  3. FOR SALE: SuperPID v2 (Closed-loop PID Router Speed Controller)
    By Mad Professor in forum Items For Sale
    Replies: 18
    Last Post: 23-04-2013, 10:48 AM
  4. Mitsubishi FR-D700 Series VFD
    By acollins in forum Motor Drivers & Controllers
    Replies: 4
    Last Post: 31-05-2012, 07:24 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •