. .
Page 2 of 2 FirstFirst 12
  1. #11
    All the components are Chinese and I am having trouble finding any model numbers. I'm starting to think that this is a bit beyond my area of expertise. So I have been thinking to replace the whole thing with something like System4C (http://www.diycnc.co.uk/html/cnc_systems.html). This would also give me a parallel port which I don't have at the moment in order to use EMC to it's full potential.

    Anyone have any thoughts or recommendations?

    I very much appreciate all your help, thank you.

    Regards,
    Dan

  2. #12
    I have the previous version of the board (where the interface board is part of the main board) and it worked well on my old PC but the charge pump doesn't work on the new PC which is only 3.3 volts on the parallel port. The drivers work ok but are a bit noisy (the steppers make a hissing sound in some positions). Other than that it seems good value for money.

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Y axis stalling
    By richie00boy in forum Machine Discussion
    Replies: 38
    Last Post: 11-09-2013, 10:37 AM
  2. rough traversing and stalling only in main screen
    By davethefixer in forum Machine Discussion
    Replies: 4
    Last Post: 12-05-2013, 08:34 AM
  3. DPC spikes stalling stepper motors
    By Mad Professor in forum Stepper & Servo Motors
    Replies: 2
    Last Post: 23-10-2011, 10:21 AM
  4. Clicking sound from stepper motor & stalling
    By francooz in forum Stepper & Servo Motors
    Replies: 2
    Last Post: 06-02-2011, 04:15 PM
  5. Missing Steps + Stalling X-axis
    By danielbriggs in forum Linear & Rotary Motion
    Replies: 5
    Last Post: 02-09-2010, 02:59 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •