. .
  1. The time has come to sell my 4 Axis TB6560 stepper motor driver board, as I have now reached the limits of this board, and now upgrading.

    I have been running this board at 28volts, and is as far as I am willing to push it.

    On my current setup I get a feed rate of around 500mm/min, using ASTROSYN MY103H702 1Nm Stepper Motors, and TR10x2 trapezoidal thread.

    These boards are still selling on eBay for around £50.

    Open to sensible offers, postage will be around £5 for UK mainland.

    If I don't get any interest in the next few days, I will put this up on ebay.

    Best Regards.
    Last edited by Mad Professor; 04-01-2011 at 03:59 PM.
    "If first you don't succeed, redefine success"

  2. Think you'll find the limiting factor is the motor not the board - these are high inductance motors. I have the same motors and even on 36v can't get more than 300rpm (600mm/min on TR10x2) on my small machine. If you want more speed its the motors you need to change not the board...

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. eBay TB6560 Stepper Motor Driver Boards
    By Mad Professor in forum Motor Drivers & Controllers
    Replies: 129
    Last Post: 22-08-2018, 05:32 PM
  2. Replies: 1
    Last Post: 16-03-2014, 07:29 PM
  3. 4 Axis TB6560 CNC Driver For NEMA17/23/34 Motor 3A on Ebay update.
    By TommeyReed in forum Motor Drivers & Controllers
    Replies: 2
    Last Post: 06-03-2012, 06:01 PM
  4. eBay TB6560 Stepper Motor Driver Boards
    By irving2008 in forum Motor Drivers & Controllers
    Replies: 13
    Last Post: 07-04-2010, 04:48 PM
  5. manual for eBay TB6560 Stepper Motor Driver Boards?
    By Dan Brown in forum Motor Drivers & Controllers
    Replies: 5
    Last Post: 06-01-2010, 10:37 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •