1. #1
    I'm located in Yorkshire in the Uk and have a modest manual workshop. Although I have a Seig super X1 bought with a view to a CNC conversion.

    I'm presently collecting parts and info for a go at a digital drive for a rotary table by way of a shallow entry and to assist in building a timepiece.

    I did build a 3 axis board from Camtronics a long while ago but only managed to get two of the three axes sort of working at set up stage. Last time I looked the one I have is way out of date.

    Have some 3D CAD experience and been at miniature engineering and home machining a while.

    Best wishes

    Last edited by irving2008; 11-01-2011 at 02:27 PM.

  2. Hi John, and welcome to the site. Are you building the rotary controller based on Kwacker's design elsewhere on this site?

  3. #3
    Hello Irving
    Yes that's the one I'm interested in. I have begun collecting some of the parts and am presently swotting up on programming pics and trying to decide to go for a finished programmer or build one myself.

Similar Threads

  1. RFQ: Need to get lead screw turned down - Rotherham area
    By rckeith in forum Projects, Jobs & Requests
    Replies: 6
    Last Post: 20-08-2011, 11:37 PM
  2. NEW MEMBER: Hello from rotherham.
    By everyreasonto in forum New Member Introductions
    Replies: 1
    Last Post: 28-12-2010, 07:06 PM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts