. .
  1. #1
    New Member, Dec 2010.

    Retired Professional Engineer (Mechanical). Served five year apprenticeship in late '50's as fitter-turner. Currently converting a GL45 dovetail bench mill to CNC using steppers (very slowly), with a Gecko 540 and Mach 3, using a Compaq Laptop thru a Warp 9 USB/Parallel interface card - seems to work well! Also have an AL330 lathe (~6" swing x30"), a pre-war Myford and a power cut-off band saw - beats a hand hacksaw any time.

    NzOldun

  2. #2
    Hi,

    Welcome to the site, your membership has been approved and you now have full access.

    Please post your questions in the correct forums for the best assistance.

    Lee
    .Me

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. threading ground bar ends
    By dazza in forum Metalwork Discussion
    Replies: 39
    Last Post: 11-02-2014, 11:41 PM
  2. Adding earth cable to 2.2Kw Chinese Spindle
    By Dwayne Dibbley in forum Generic Chinese Spindles
    Replies: 4
    Last Post: 13-03-2013, 04:04 PM
  3. Drivers,BOB and PSU are in a PC case, do i earth the case
    By deannos in forum Motor Drivers & Controllers
    Replies: 4
    Last Post: 27-11-2011, 03:43 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •