Thread: Additional info System 4 DIYCNC
Threaded View
-
04-02-2011 #1
Hiya folks,
Upgrade time and looking at a system 4 as have had good results with Roy's equipment. What I need to know is will the board handle 42V DC as it is recommended for 24-30V?
I have a 24V unit (also from Roy) and a 42V unit (PS407 from Zapp) and would like to use the 42V to insure that there is enough juice for both the Steppers (now up to 4) and the spindle motor (Kress 1050W that finally have found the info for slaving to Mach3). So there is my reasoning and if not can always go with the modern version of the system 1 V2. I am currently running the PCPPS with Charge Pump.
Any information would be great as need to get cutting product as have interested clients just need finished product to sell.:whistling:
Thanks all for any and all information.
Michael
PS I hope everyone is safe as we are having some pretty fierce winds today here in Scotland.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
NEW MEMBER: Hello from Ireland..........Need info....
By aquila787 in forum New Member IntroductionsReplies: 6Last Post: 10-09-2012, 10:09 PM -
Software info
By Web Goblin in forum CAD & CAM SoftwareReplies: 5Last Post: 09-01-2011, 05:41 PM -
Nice one Roy at DIYCNC
By routercnc in forum Motor Drivers & ControllersReplies: 9Last Post: 26-10-2010, 02:31 PM -
Info on V23
By m.marino in forum CAD & CAM SoftwareReplies: 1Last Post: 14-10-2009, 09:18 PM -
Wiring in power and E-stop on DIYCNC Board
By m.marino in forum General ElectronicsReplies: 2Last Post: 10-05-2009, 10:15 AM
Bookmarks