Quote Originally Posted by John S View Post
How can you do 4 and 5 axis in 2.5D ?

If you can't get the facts correct what credibility do you have ?

To do 4 / 5 axis the program has to have the ability to work with A and B axis, can Easymill do this
Yes Easymill can rotate parts in 4 and 5 axes - but not while cutting.

I am surprised by your response - you say 'what credibility do you have ?' yet you do not explain what you mean - from my web research there seems to be confusion between rotation axes and 2D/2.5D/3D.

And more specifically a great deal of confusion as to what constitutes 2.5D!


With Easymill as far as I am aware the axis is rotated but doesn't cut while rotating.
When the part has been rotationally positioned, the cutting starts in 2.5D.

Isn't 5 axis work holding and machine stability beyond hobbyists' budgets? So why is 5 axis an issue for hobbyist software?

I need many clamps just to hold the small pieces I do in x,y,z - so with 5 axes I am not sure how the work pieces would be securely held - unless I get a very expensive machining centre.