moving mach3 help please

[h4ppy-chris]

Chris

You can print your XML file off and yes it will set all your I/O inc your motor pin config.

Andy

on the new pc now and it works all the settings look good, not pluged the board in yet to test. will let you know cheers guys

[djc]

When you move Mach, as others have said, all you need do is copy the profile (XML) file.

The other thing, not yet mentioned, is your license file (you have licensed it, haven't you?).

A further bit of good advice I've seen is to copy these two files to a USB stick, put it in a ziplock bag and tape it inside the PC or even onto the machine somewhere.

[h4ppy-chris]

backed up on a cdr (cheaper) cheers djc