Help with X3 mill and XML files

[m_c]

If emergency mode can't be cleared, then I'm guessing the issue is with the E-stop circuit/configuration.

Best option is audioandy's suggestion, so we can have a look.

[i2i]

Hi,
Thanks for your reply. Yes I have managed to relocate the mill it's in a garage in Radyr now, but I still cannot get it working. I know that you are very busy, and that you cannot spend any time with me but if I send you the XML file could you please tell me how to correct it, so that so that the machine will run
Thanks for your time.
Best wishes,
Eugene.

organise a day and i will pop up and sort it out again for you, but it'll have to be after Monday.

[Eugene]

That is wonderful, can you really spare the time? I would be most grateful if you could do it just this once, as the machine is beginning to drive me nuts.any day after Monday is OK. Please let me know when you can make it.
Very best wishes,
Eugene.

[Eugene]

Thank you to everyone who has offered to help me. But the member i2i lives in my area and he has very kindly offered to visit me. This is outstanding generosity as he is busy setting up his business, ad it is the second time he has done this, due to my carelessness

[i2i]

Tuesday looks good, is there a time that's good for you.

[Eugene]

Hi,
Tuesday will be fine. If you give me your address I will come and pick you up
Is 1.00 pm OK for you? If it is not please give me a time to suit you.
Regards.
Eugene.

[i2i]

yes 1pm is fine, i'll pm you my address.