I am now looking at or for a small mid desktop milling machine with a auto tool changer.
Would like if poss for it to be R8 fittings.
The bed size would like to be x300-500mm y300-400mm z300-400
I dont know a lot about what machines are out there but DO need the tool changer.
Now for a lathe would like up to 300-400 between centres and a tail stock.
I turn very thin work 8.5mm over 180-250mm out of brass and ally. Thiswould also need a tool changer.

Does anyone out there know of somthing that could fill that spec?

If so please post and a like to your suggestion

Many thanks Rik