Page 18 of 18 FirstFirst ... 8161718
  1. #171
    m_c's Avatar
    Lives in East Lothian, United Kingdom. Last Activity: 8 Hours Ago Has been a member for 9-10 years. Has a total post count of 2,060. Received thanks 228 times, giving thanks to others 5 times.
    Here's a vid of an Igus solution for supporting long screws - https://www.youtube.com/watch?v=Duq163m59TU

    And I'm struggling to find a video of the system magicniner mentioned, but I'm sure I've seen one at some point.
    Avoiding the rubbish customer service from AluminiumWarehouse since July '13.

  2. #172
    Quote Originally Posted by m_c View Post
    Here's a vid of an Igus solution for supporting long screws - https://www.youtube.com/watch?v=Duq163m59TU

    And I'm struggling to find a video of the system magicniner mentioned, but I'm sure I've seen one at some point.
    I have thought about that, especially on a slower machine like my new foam cutter. But anyway one will have to spin 3m 16xx screw at least. Which is way heavier than spinning a nut.
    project 1 , 2, Dust Shoe ...

  3. #173
    Boyan, If you could look at this, I would appreciate any feedback. thank you

    MutzyNewZip.zip

  4. #174
    Quote Originally Posted by magicniner View Post
    It took me a while to find this but I knew I'd seen it somewhere

    https://www.youtube.com/watch?v=NWB6FAJCPhA

    And there's this, a more technical but more expensive system

    https://www.youtube.com/watch?v=kkcVWIsXGjk

    I'm sure there are other ways to skin this particular cat but these are the only two I've come across so far ;-)

    - Nick
    Check out this configuration:



    Some nice food for thought in this vid:

    Last edited by Lee Roberts; 16-01-2018 at 11:05 AM. Reason: Added second vid
    .Me

  5. The Following User Says Thank You to Lee Roberts For This Useful Post:


  6. #175
    Hi Iam new here and also my English is poor too. I just need to know where can I find such a code (Firmware Version 1.2 Type1.) I can find it in zip file but not download. so much thanks if some one could help me any help will be appreciated.
    my Email is: mhdker@gmail.com
    best regards.

Page 18 of 18 FirstFirst ... 8161718

Similar Threads

  1. Rotating Ball nut
    By drumsticksplinter in forum Lead Screws, Nuts & Supports
    Replies: 27
    Last Post: 28-08-2016, 04:46 PM
  2. Replies: 15
    Last Post: 25-06-2016, 09:13 PM
  3. Rotating Ballnut Design MK3
    By Jonathan in forum Linear & Rotary Assemblies
    Replies: 0
    Last Post: 15-12-2013, 12:35 PM
  4. advice on floating bearing - outer ting rotating
    By dsc in forum Lead Screws, Nuts & Supports
    Replies: 8
    Last Post: 18-11-2013, 01:23 PM
  5. Design help etc required with DIY CNC Router Design / Build
    By MikeyC38 in forum Gantry/Router Machines & Building
    Replies: 12
    Last Post: 21-10-2011, 03:50 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •