. .
  1. #1
    Afternoon all,

    As the title states i am a noob at this with what i guess is one of the most common Noob questions going :)

    Some background first.

    I am a Mech E/Designer with a good engineering background in everything from Military antenna to consumer electronics. Most of my time is on 3D CAE but i often escape back to the Bridgeport and colchester manual machines.

    I am looking to build something for home projects and would like open source plans or similar as i cant afford the huge time resource needed to develop the kit from scratch.

    I have the plan set for JoeCNC 2006 found on CNCzone but its too grand for what i want.

    What i am after is the ability to machine aluminium on a bed no larger than 300 x 300 (12" X 12")

    Anyone know of a set of plans that would suit?

    I want to build from scratch as A) buying a Denford style mill is more expensive and B) half the fun is building something.

    Budget restrictions at the moment (i say at the moment as i know once i start it will go out of the window) is approx £500 working, i have a laptop (mobile workstation capable of thrashing Solidworks). I am pretty good at scrounging so i would think the dearest parts will be the controller and motors (maybe servo and not stepper?)

    First things first is the chassis/bed/framework.

    Any help is grately appreciated ;)

  2. Rich,

    Welcome to the forum.

    I too looked for a set of plans for a similar machine and came up with a blank. So I decided to build a small 250 x 250 machine using MDF to my own design for PCB milling and as a learning solution. I am working on a bigger design for machining ali, but I am still debating using aluminium extrusions or a welded steel frame.

    I, as would many on this forum, would be interested in your thoughts, as a Mech E/D, on, and tools for, how to do structural analysis to avoid wasted build effort.

    Irving...

  3. #3
    Hi Irving,

    Looks like i have either a long development schedule ahead or build a monster :)

    As for FAE tools.

    I dont know much about any possible open source software but i use Cosmos in Solidowrks quite regularly.

    Its pretty good for tension, stress, deformation and heat dispersion but to expect anything less than 80% accuracy would be optimistic.

    The other issue is th epower needed to run such software. A simple heat transfer model on a heatsink will take a machine with 2GHz processor and 4Gb RAm approx 5 minutes. Doesnt sound much but add a few other parts and it raises that time quite a bit.

    As for my dilema. I may scale the JoeCNC to suit what i need frame wise. I dont like the idea of an MDF frame for anything other than maybe a small scale wood router. Aluminium or at a push HDPE or similar frame will do for what i am after.

  4. #4
    Quote Originally Posted by Kip View Post
    Hi Rich, Welcome to the forum.

    £500 all up and running....Might be possible!
    Have you anything in the way of linear slides or bearings?....Your indication of a time factor is worrying....Everything takes too long to do :D
    Hey Kip,

    I am totally free from any hardware at the moment. I am pretty handy with most things so its a case of if i cant build it i will buy it ;)

  5. #5
    Hi Rich welcome to the forums mate !

    Take a look at www.slidesandballscrews.com i can offer the same stock for the same prices, let me know if i can help :).
    .Me

  6. Quote Originally Posted by richb77 View Post
    Hi Irving,

    Looks like i have either a long development schedule ahead or build a monster :)

    As for FAE tools.

    I dont know much about any possible open source software but i use Cosmos in Solidowrks quite regularly.

    Its pretty good for tension, stress, deformation and heat dispersion but to expect anything less than 80% accuracy would be optimistic.

    The other issue is th epower needed to run such software. A simple heat transfer model on a heatsink will take a machine with 2GHz processor and 4Gb RAm approx 5 minutes. Doesnt sound much but add a few other parts and it raises that time quite a bit.

    As for my dilema. I may scale the JoeCNC to suit what i need frame wise. I dont like the idea of an MDF frame for anything other than maybe a small scale wood router. Aluminium or at a push HDPE or similar frame will do for what i am after.
    I've been using Framework which is freeware but has some limitations. Runs fine on a 2GHz laptop and gives a good idea about deformation under load of a gantry for instance...

    I'm interested in your suggestion of HDPE... there was a recent discussion here about PVC v Ali for construction and a bit of research suggested that PVC was about as rigid as MDF but stronger in tension. When I looked at other plastics, including HDPE, I wasn't impressed by much of them as compared to thin-wall Aluminium box section which, weight for weight is more rigid and stronger. Can you shed any more light on this? PVC was much more expensive as well....

  7. #7
    i was thinking HDPE simply for cost. I would need quite a bit more volume of plastic compared to aluminium and to be frank i have more experience with aluminium and weight to strength it makes perfect sense.

    Corrosion shouldnt be an issue even though aluminium is extremely reactive it takes a long time ot corrode seriosuly.

    Although it may also mean i start a home anodising bath :)

    I shoudl add, I am still looking for a suitable plan set ;)

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. NEW MEMBER: Hello from Suffolk
    By lockyg in forum New Member Introductions
    Replies: 10
    Last Post: 20-07-2011, 01:08 PM
  2. NEW MEMBER: New member from Essex
    By swarfy in forum New Member Introductions
    Replies: 1
    Last Post: 08-12-2010, 01:38 PM
  3. NEW MEMBER: New member fron Cambridge
    By GeoffV in forum New Member Introductions
    Replies: 3
    Last Post: 30-09-2010, 07:25 PM
  4. NEW MEMBER: Hello from Lowestoft, Suffolk
    By ciscokiduk in forum New Member Introductions
    Replies: 0
    Last Post: 19-04-2009, 09:37 PM
  5. NEW MEMBER: New Member - Essex UK
    By alan2525 in forum New Member Introductions
    Replies: 1
    Last Post: 16-10-2007, 01:43 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •