1. #1
    Hi all,

    I have an engraver and a cnc with 2 power boxes made by dahlgrem or dehlgram (not sure how its spelt!), from a company in California.

    I would like some help in setting it up and was hoping to find someone with the expertise. the machines are old so was really hoping if i could get help setting it up on a new computer.

    I would really appreciate your help.

    Thank you!

    p.s if you could come to my place in walsall then that would be greatly appreciated and would let you use the machine's for whatever you want. if not then over the net is fine.

  2. #2

    It's spelt dahlgren. I'm about an hours drive from you so could potentially come over (PM me?).

    Can you tell us any more about the machines and the current drives? By setting it up on a new computer do you mean setting it up with Mach3?
    Last edited by Jonathan; 08-06-2011 at 09:50 AM.

  3. #3
    Hi Jonathan,

    Thanx for your reply.

    I would really appreciate that. do you have a number i can call you on or an email???


Similar Threads

  1. need CNC engraving Machine
    By SHAH in forum Classified Ads, Buy, Sell & Swap
    Replies: 4
    Last Post: 08-07-2015, 10:28 AM
  2. Is there a specific setting for using a diamond drag tool for engraving?
    By petesos in forum Tool & Tooling Technology
    Replies: 4
    Last Post: 13-03-2014, 11:22 PM
  3. Any backlash setting needed for ballnut endowed machine?
    By HankMcSpank in forum Lead Screws, Nuts & Supports
    Replies: 1
    Last Post: 13-09-2013, 11:00 PM
  4. Need help setting up a CNC router machine please
    By 1albobs in forum Gantry/Router Machines & Building
    Replies: 4
    Last Post: 27-02-2012, 05:16 PM
  5. diy cnc engraving machine fair price?
    By diy-john in forum Gantry/Router Machines & Building
    Replies: 1
    Last Post: 09-03-2011, 12:24 PM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts