Thread: CNC Router Machine?????
I'm looking to cut and route my own kitchen/bedroom doors. I do the carcasses and want to upgrade. I'm on a tight budget and not sure which cnc router machine is suitable. I've seen a couple of cheap ones, ranging from £8k - £14k and some very expensive ones £35k+.
There's rhonmac £8k, a dutch one thats £13k, then there's the italian ones that are £35k+
I'm after some advise as to which one would be suitable because all of them are telling me same things and I'm confused. I want a machine that I can start with and upgrade at a later date, any help would be appreciated on this.
Anamsey, firstly, you see this machine working performance, http://s1232.photobucket.com/albums/...t=OMNI1325.mp4, then see the machine features: http://www.omni-cnc.com/products/CNC...r_OR1325A.html. This machine is designed special for woodworking industry. Fitting Panasonic servo motor, Taiwan Hiwin linear guide way and bearing, running at 30m/min, with HSD 6hp spindle made in Italy, fitting with non-oil vacuum pump, dust collector, total price is less than £10k.
http://s1232.photobucket.com/albums/...t=MOV00409.mp4 This link is about OR2030 CNC router with Panasonic servo motor show.
Contact us if you are interested in.Export Supplier of CNC Router, Laser Machine, Plasma Cutting CNC Router.
By therouterlady in forum Manufacturer NewsReplies: 0Last Post: 18-09-2013, 04:28 AM
BUILD LOG: My first CNC Router *PAULIC* (the machine)By paulus.v in forum DIY Router Build LogsReplies: 6Last Post: 05-03-2013, 01:11 AM
By Lovre in forum Gantry/Router Machines & BuildingReplies: 16Last Post: 09-02-2013, 08:28 PM
By troyboy1 in forum Milling Machines, Builds & ConversionsReplies: 1Last Post: 04-12-2012, 10:19 PM
By 1albobs in forum Gantry/Router Machines & BuildingReplies: 4Last Post: 27-02-2012, 05:16 PM