1. #1
    Could any one give me advise on buying a new CNC router.
    It should have usable area around 12" square and a cutting depth around 2.5".
    It is mainly for woodcutting on Wooden clocks and Automata, the clocks shown on the website are typical.
    I have a budget of 2500 for everything, router, spindle, controller and software.

    Thank you

    Brian Law


  2. #2
    Hi Brian

    I started looking a month or so ago, and to start with was going to build my own, but then found the more I looked into it, the more I found things that could go wrong if I built it, and I need something solid and reliable, so then started looking for a kit. Kits, suppliers were very hit and miss, and I found most took ages to answer e-mails or didn't bother unless you sent several, and some gave up answering when I guess I asked to many questions, so then quite by chance while searching on here come across www.exelcnc.com and yes they are more expensive as they are pre built, but e-mails are answered promptly, and there happy to answer any questions you want to ask, plus as I need a computer to run it from, and found I can send them my computer I want to run it, and they do all the setup so when you get it, it's ready to go, and my fav thing it comes with a warranty and complies with all British safety standards.

    As I said yes its more expensive, but then if I build one and it goes wrong or doesn't work properly it's my problem, if there one goes wrong its there's problem to sort out.

    J Don

  3. Hi Brian,
    I checked your clock work on your website, and suggest you two models of OMNI CNC router suitable for you, OR690 CNC router and OR1325A CNC router, here is the link: http://www.omni-cnc.com/products/CNC...ter_OR690.html, http://www.omni-cnc.com/products/CNC...r_OR1325A.html. You click the video link to see OR1325A working performance. http://s1232.photobucket.com/albums/...t=OMNI1325.mp4.
    About OR690 CNC router features, I sent email to your gmail. My email address is sales@omni-cnc.com, please check it.
    Hope you find that OMNI is your right supplier.
    Export Supplier of CNC Router, Laser Machine, Plasma Cutting CNC Router.

Similar Threads

  1. Router has died. Need Advise Please.
    By Bush Flyer in forum Spindles & Drive Motors
    Replies: 56
    Last Post: 09-03-2014, 12:42 AM
  2. Chinese 6040 CNC Router Advise Needed
    By Bob Hepple in forum Chinese Machines
    Replies: 24
    Last Post: 27-11-2013, 11:00 AM
  3. I need advise again
    By habibuzziwa in forum General Discussion
    Replies: 14
    Last Post: 08-10-2012, 09:08 AM
  4. I need advise
    By habibuzziwa in forum General Discussion
    Replies: 7
    Last Post: 03-10-2012, 09:50 AM
  5. Buying a new CNC router
    By jameshoy in forum Milling Machines, Builds & Conversions
    Replies: 0
    Last Post: 30-08-2011, 09:52 PM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts