Page 20 of 25 FirstFirst ... 101819202122 ... LastLast
  1. #191
    Quote Originally Posted by luke11cnc View Post

    it's Luke's bday next month any suggestions for a CNC related present ??
    How about one of these. ? ?

    What date is Lukes B-day.?

  2. #192
    cool a bit out of my price bracket

    1st December and he is 11

    live he lives that long Lol


  3. #193
    Hello Jonathan

    thank you for replying to my email

    here is the image I said I would post for you'r reference

    Click image for larger version. 

Name:	IMGP1202.jpg 
Views:	88 
Size:	65.4 KB 
ID:	4815

    I would like to recess these bolts into the gantry sides please 10 holes in total

    I hope you understand now ??

    James and Luke


  4. #194
    Quote Originally Posted by JAZZCNC View Post
    I have watched that too many times.

    Quote Originally Posted by luke11cnc View Post
    I hope you understand now ??
    I see ... yes can do that, but is is really necessary (might be a bit awkward to set up)?

    PS: Don't let Luke do the bolt up too tight on the transformer because that may damage the windings.

  5. #195
    No I suppose not but I will have to make the stepper mount bracket to accommodate the bolts


  6. #196
    found a bday present for him


  7. #197
    Quote Originally Posted by luke11cnc View Post
    Give up your not kidding anyone.!! . . . . WE KNOW IT'S FOR YOU.:dance: . . .Can I have one Dad.:lol:

    I have the proper clamp for that transformer if you need it, didn't realise I hadn't sent it.!

  8. #198
    yes Jazz you might be right

    I was thinking more along the lines of copying it in aluminium but bigger and more lifting weight as it only lifts 100g max

    even to the extent of copying the electronics so we have two

    do you think this is do able ???

    clamp would be good Jazz


  9. #199
    Well today I've been over to see my very good friend Jonathan

    and I lost a lot of money with out placing a bet or dealing a card
    only joking mate

    It still astounded me how much knowledge you have in your sweet head and put us fossils to shame.

    I really wish I had a friend like you Jonathan growing up.

    Any way Luke has just about given up on the CNC machine Dad you will never finish it I mean to prove him wrong

    All the parts fit apart from the bearings on the supported rails But not a problem I will take them down the road and have them re-cut.

    What a twat I am I gave you the wrong ballscrew mount but never mind I will have the mounts machined Jonathan

    I will post more Photos this week and even a video of what to look out for when new members decide to build there own machine


  10. #200
    well I've been in the garage again today and fitted a little bit more to Luke's CNC and I must admit it is coming together rather well.

    Click image for larger version. 

Name:	IMGP1203.jpg 
Views:	128 
Size:	155.1 KB 
ID:	4852

    The above image shows some items made by Jazz.

    the M10 T-nuts work really well I could of gone with the M8's you can buy from JKN but I wanted to spread the load area a bit more.

    I am also pleased with the supported rail clamps/guides that Jazz also made me shown in the above image they keep it square and true while Luke drills them.


Page 20 of 25 FirstFirst ... 101819202122 ... LastLast

Similar Threads

  1. BUILD LOG: New Build - For Your Amusement - MK-2 build
    By Karl in forum DIY Router Build Logs
    Replies: 11
    Last Post: 11-06-2012, 07:34 PM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts