Thread: Chinese CNC plasma experiences
I'm looking for a cutting machine for sheetmetal and for my buget an italian machine is very expensive. I'm looking at the Chinese market.
I wonder if anyone has direct experience with the Chinese machines and what is the impresion. Do you know any really serious chinese companie with acceptable standards.
I should cut stainless steel 0.8mm to 3mm. For me, there is not important the cutting speed and automatisms. Would be important the quality of cut: good resolution and without burrs.
Can you recommend me on which parameters should I be careful?
By Ricardoco in forum Routers, Spindles & ControllersReplies: 121Last Post: 17-11-2013, 01:47 PM
BUILD LOG: From Chinese to TaffyneseBy Carlb1058 in forum DIY Mill Build LogsReplies: 6Last Post: 08-07-2013, 11:03 PM
By 200thhorseman in forum Gantry/Router Machines & BuildingReplies: 4Last Post: 09-07-2012, 12:40 PM
By scjb in forum Milling Machines, Builds & ConversionsReplies: 21Last Post: 06-10-2011, 03:43 PM
By Colin Barron in forum Marketplace DiscussionReplies: 15Last Post: 23-08-2011, 07:58 PM