. .
  1. #1
    I'm looking for two 600mm profile rails and two 900mm rails, both with two bearing blocks. I will consider anything 15mm wide or more. If they are slightly longer that's ok as I guess I can cut them.

    This is to replace the SBR-20 rails of the same dimensions on my router, so those will be spare when I get the profile rails.

    Thank you...

  2. #2
    I've found some 15mm hiwin rails, like those sold at zapp, for a good price however I'm not sure if that size is sufficient for my y-axis? The load ratings are much greater than what I have calculated I need, but other machines seem to use bigger ones. Is there something I have missed?

  3. #3
    i used 25mm profiles... they sit nicley over the aluminium profile slots and i though id sooner go over the top and play it safe but looking back now i think could have made my machine half the weight and had it perform pretty much the same as it does

    iv even used 20mm rails on my Z

    its only a small machine, aprox 350mm x 500mm cutting aria... i would need to strip it down to move it :(

    i doubt you have missed anything jonathan, i think people play it safe when buying profile rails... they tend to be exspensive no matter what size they are

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. So what to do with this profile?
    By Rogue in forum Gantry/Router Machines & Building
    Replies: 1
    Last Post: 25-09-2012, 09:03 PM
  2. FOR SALE: RM1610 ballscrews(used + 1605 x 900mm screw (new)
    By rbs in forum Items For Sale
    Replies: 1
    Last Post: 10-05-2012, 08:23 PM
  3. NEW MEMBER: profile
    By luke11cnc in forum New Member Introductions
    Replies: 1
    Last Post: 25-07-2011, 07:48 PM
  4. FOR SALE: CNC for sale 3000mm x 900mm+ bed size
    By c cunningham in forum Items For Sale
    Replies: 1
    Last Post: 15-06-2011, 04:35 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •