1. #1
    hi my name is ben im 22 and have recently started working as a cnc operator on fanuc controlled machines. i would like to learn programming also as it offers a more ucrative career. i have began o learn the m and codes we use in our programmes but i would like help in learning more. if there is anybdy out there who could provide me with information on how to programme cncs for simple jobs i would be very rateful. perhaps you could send simple facing and turning cycles and some kind of information of how to interpret the programme. any type of help like this would be greatly appreciated. thanks alot

  2. #2
    There are several books that would probably get you off to a good start with many program examples. Do a search for Peter Smid at one of the online book stores. He a few different books that will cost around 40-50 dollars.

Similar Threads

  1. Semi - Experienced / Experienced CNC Turner required in Rutland
    By ChrisMunday in forum Opportunities Available & Sought
    Replies: 0
    Last Post: 05-02-2014, 11:08 AM
  2. Experienced CNC Millers Needed
    By Sallyanne in forum Opportunities Available & Sought
    Replies: 0
    Last Post: 20-08-2013, 10:47 AM
  3. experienced CNC programmer/operator needed
    By cyboermedic in forum Opportunities Available & Sought
    Replies: 0
    Last Post: 25-10-2012, 08:05 PM
  4. CNC programmers, operators and setters needed UK Wide
    By CNCRecruiter in forum Opportunities Available & Sought
    Replies: 0
    Last Post: 26-03-2012, 01:33 PM
  5. CNC Programmers Needed in West Midlands
    By EncoreTechnical in forum Opportunities Available & Sought
    Replies: 0
    Last Post: 09-03-2012, 10:28 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •