Thread: Diy Brushless Spindle
Threaded View
-
08-11-2011 #10
The second piece is for the cap, I've rough (rough bring the operative word!!) turned the first piece but should really have bought a longer piece of Ali...so I'm going to turn a shoulder in the end of the first piece to more accurately hold it in the jaws (so I can then finish machine out the jaw marks) then finish machine, bore it for the bearings and part off ( couldn't get the parting off tool near enough without hitting the jaws before)...
Well that's the cunning plan anyway ;-)
What's the easiest way to accurately drill the holes for mounting the motor without any sort of indexing head/table anyone?
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Denford router - Brushed router too brushless spindle - Help and advice please
By Tom B in forum Brushless Spindles & MotorsReplies: 4Last Post: 16-05-2016, 09:13 AM -
All-In-One Brushless Servo System
By Gytis in forum Stepper & Servo MotorsReplies: 0Last Post: 22-12-2015, 10:21 PM -
DIY Brushless spindle
By booski in forum Brushless Spindles & MotorsReplies: 2Last Post: 30-10-2013, 09:36 AM -
Using RC Brushless motors as spindle
By Jonathan in forum Brushless Spindles & MotorsReplies: 30Last Post: 20-12-2012, 08:51 PM -
Mach 3 control of DC Brushless motor?
By templecorran in forum Artsoft Mach (3 & 4)Replies: 15Last Post: 18-11-2010, 04:20 PM
Bookmarks